All Categories
Tips: In winter, the solar light is not able to be fully charged for the lack of light. So it's normal if the solar light is not bright enough and illumination time is short. Light time depends on how much it is charged during the daytime. When hearing the "click", the lighting system is unlocked. The performance of the solar sensor motion light depends on the geographical location, weather please fully charge the device before first use. Specification: Solar panel: 5. 5v 0. 75w monocrystalline solar panel. Solar panel angle: 60 degree. Battery: 3. 7v 1200 mah lithium battery. Led power: 1w. High light delay: 30s. Waterproof rate: Ip65. Lumen: 120 lm. Charging time: 8 hours. Working time: About 12 hours. Sensor distance: 3-5 meters. Led: 12 led. Sensor mode: Highlight sensor & motion light. Sensor angle: 90 degree to 120 degree. Package included: 1 x solar sensor wall light 1 x screws 1 x plastic anchors 1 x manual. Mode conversation: When it sensing all round is too dark, it enters to light on mode automatically for 30 seconds and sensing human movement, it enters to light on mode automatically. It delays 30s when people walk out of its sensing range, then auto-off. Motion mode: After fully charged and activated by inserting a needle (supplied with item) into a tiny hole in the light, automatically turn on in darkness or at night, delay 30s when movement is detected, then automatically off. Note: When it not lit - 1. Confirm switch in on or not 2. Confirm whether it is being continuously used in a long-term and no charge, 3. Recharge it timely before use again. 4. Make sure people moving within the sensing range. 5. Make sure the solar sensor light being installed within 6 meters height. 6. Confirm install direction is correct (solar panel should be facing up) 7. Confirm no objects block it and solar panel can receiving sunlight.