【Upgraded Quick Setup Turtle Base】 Featured with a revolutionary spring ring locking mechanism, our light stand base enables the chassis legs to pop up by gravity in seconds. All you need to do is to pull the locking sleeve on the top of the base. The three legged structure provides stability to hold your photography equipment

【Durable Reinforced Rod】 Made of industry grade stainless steel, the central pole of this photography C stand is thickened and forged with large diameters of 1.2in (30mm), 1.4in (35mm), and 1.6in (40mm), delivering a reliable central bearing with longer service time and a maximum load capacity of 44lb/20kg

【Versatile Arm with High Load Capacity】 The 4.2ft (127cm) holding arm boasts a maximum load capacity of 17.6lb (8kg), finished with a 1/4" stud on one end and a 3/8" stud on the other end for attaching a strobe light, CB60 RGB 70W/RGB1200 LED video light, reflector, umbrella, SF30120Q/SF-RPBO26 softbox and other photographic equipment. You can also install your light stand attachment with a 5/8" mount onto either end of this grip arm

【Adjustable Height】Our C stand can be adjusted in height from 5ft (153cm) to 10.5ft (320cm), accommodating different lighting needs. The center stand is equipped with a built in buffer spring to reduce the impact of sudden drops of the installed equipment and protect the equipment when adjusting the height

【Flexible Use】Two premium and standard grip heads are crafted with 4 different mounting channels of 5/8", 1/2", 3/8", and 1/4", accepting any compatible accessories for your enhanced photography solutions. These mounting adapters enable height and angle adjustment (360° rotatable) for enhanced flexibility, with an excellent locking system for stability and safety