【Top-Flight Performance 】The 51.2V 100Ah liFePO4 battery is manufactured by 16Pcs Automotive Grade A grade prismatic cells with higher energy density, more stable performance & greater power. And has a compact 5.12kWh energy, which is equivalent to 4pcs 12V 100Ah LiFePO4 batteries in 4S (or even 8pcs 12V 100Ah AGM batteries in 8S).

【Touch Screen & APP Monitoring】Our 51.2V 100Ah Lithium battery has a more user-friendly design with a touchable smart display that enables you to monitor & control the battery at any time and anywhere. This is undoubtedly a huge innovation that brings great convenience to the user experience.Also features APP for displaying battery information on your phone. Just download our APP on the phone.

【One-touch Switch & Double Terminals】 48V 100Ah LiFePO4 battery support a one-touch ON/OFF switch for easy operation, it can be turned on or off with one touch. This button also acts as a circuit breaker, it will automatically shut down to protect the 51.2V battery when the load current is too high. The lithium battery has two positive terminals and two negative terminals, which help to equalize the current, reduce heat and avoid overheating caused by the accumulation of all on one terminal.

【Exceptional Longevity & Easy to Use】 Our 48V 100Ah lithium batteries provide 5000+ cycles compared to 300~500 cycles in the lead acid battery. Helping to minimize replacement costs and reduce the total cost of ownership. And the weight of the lithium iron phosphate battery is 50% lighter than the lead-acid battery of the same capacity, the reduced weight makes it easy to carry and install.

【BUILT-IN 100A BMS & Low Temp Cutoff 】 Vatrer Power deep cycle battery has built-in 100A BMS to protect it from overcharge, over-discharge, over-current, and short circuit with excellent low self-discharge rate. With high temp cutting off prevents charging over 167 °F (75°C). And Low temp cutoff protection prevents battery damaged in low temperature environment.

【NOTE】The 48V 100Ah adopts our latest appearance design. All the configurations are the same as the previous version. It can still be connected in parallel with the earlier version.