IFUN 3D Resin 405nm HiTemp LCD DLP Printer Compatible with Anycubic Elegoo SLA UV Rapid 3D Print Liquid Photopolymer Rigid Resin

Pay with

About IFUN 3D Resin 405nm HiTemp LCD DLP Printer

IFUN 3D Resin for LCD DLP Printer Rigid Hard HiTemp Resistance Resin 405nm UV Cure Rapid 3D Printing Liquid Photopolymer *To ensure the great stability of 3D printing model, IFUN choose Polyurethane as raw material rather than Epoxide Resin. *To ensure the personal safety , even though there is low odor with Polyurethane, IFUN would rather choose Polyurethane than add BPA(Bisphenol A) which is found to be detrimental to human health. *Lab test approved with MSDS & RoHS certificate. *1-year limited warranty, lifetime technical assistance and 24 hours professional customer service Storage Keep away from sunlight & seal at room temperature It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin. Usage Shake well before use, Avoid direct sunlight Do not drink it and keep out of the reach of children & pet Wear gloves to avoid direct skin contact and keep the room ventilated.If feel discomfort after skin contact, please seek timely medical attention Once the model is complete, please wash it with high 95% degree or higher ethanol alcohol for 30 seconds at least If you don't use the resin please do not leave them in the resin tank over 48 hours