NOVA3D 3D Printer Resin for UV Curing LCD DLP Printing Machine (500ml, Clear)

Pay with

About NOVA3D 3D Printer Resin For UV Curing LCD DLP

Direction of Use & Storage: - Shake well before use. Keep the room well-ventilated when using it. - Avoid direct sunlight and dust. Store in cool and dry place in temperature 64.4°F-82.4°F (18°C-28°C) - Keep it out of reach of children and pets. - We suggest wearing a safety glasses/mask and gloves to avoid direct skin contact especially for sensitive skin and prolonged contact. Once the print is cured, you can handle the print with your bare hands, but you can ensure safety by keeping your gloves on throughout printing and post-processing. - Avoid contact with eyes. If contact occurs, rinse eyes thoroughly with plenty of water. If feel unwell after skin or eyes contact, please call doctor immediately. - Please wash the completely 3D print with 95% or more Isopropyl Alcohol to clean at least 30 seconds. - DO NOT mix unused resin and used resin. Please do not leave the remaining resin in the resin tank over 48 hours without use. Resin Parameters Bottom Exposure Time: 60s, each layer exposure time: 8s Solidify Wavelength: 405nm Viscosity (25°C): 150-200MPa Density: 1.05-1.20 / cm3 Tensile Strength: 36-52Mpa Elongation at break: 11-20% Flexural Strength: 59-70MPa Flexural Modulus: 1.882-2.385Mpa Zod Impact - Notched: 44-49kJ/mm Hardness (Shore D): 84D Heat Deflection Temperature: 80°C Glass Transition Temperature: 100°C