We specialize in hard to find items
All Categories
In The Swim 1 Gallon Dark Blue Super Poxy Shield - Epoxy-Base, High Gloss, Swimming Pool Paint - Long Lasting Stain Resistant
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
In The Swim 1 Gallon Dark Blue Super Poxy Shield Features
-
In The Swim super epoxy paint is a great option for covering the interior surface of your swimming pool. This is a high quality paint that is incredibly durable, and will last up to eight years with simple routine maintenance before repainting is necessary.
-
Our paint can help seal small cracks in the pool surface. Once applied, this paint will create a highly polished, unified surface that is hard, abrasion-resistant, and non-porous. Giving your swimming pool that professional look for years to come.
-
Rain or morning dew won't affect the pools surface if its been at least three hours after completion. A milky discoloration may occur on the epoxy, not within the coating. However, that discoloration will disappear within a few weeks after filling the pool with water, leaving an immaculate coat of paint behind.
-
Epoxy pool paint will not adhere well to other paints, it is best to use a power washer to remove prior to painting. The hardening process for epoxy will take about a week for an outdoor swimming pool, and two weeks for an indoor pool.
-
CAUTION: epoxy based paints can make steps, shallow water, and wadding pools to become possible slipping hazards. To protect users, make these areas slip resistant by very lightly sifting silica sand on the paint while it is wet.
About In The Swim 1 Gallon Dark Blue Super Poxy Shield
In The Swim Super Poxy Shield pool paint is the highest-quality epoxy pool coating available. A single coat lasts up to 8 years. If you are painting a bare surface, please make sure you prime the surface before rolling the Super Poxy Shield. Super Poxy Shield over an Epoxy Primer will deliver a stain-resistant, tile-like finish on the pools interior. Due to the tile-like finish, we suggest sprinkling sand on the coating before it dries for steps, shallow areas and wading pools. This will make these areas slip-resistant. Start rolling paint with the walls of the pool first and finish with the floor last. Coverage: Approximately 125 - 150 square feet average per gallon. Should be applied liberally using a 1/2" nap roller cover. Pot Life: 30 minutes at 85°F and above. Curing time will vary depending on the outside ambient air temperature. If the outside ambient air temperature is 60 - 65° F cure time will be 6 days. For every 5° F lift in outside ambient air temperature that will cut a day off of the cure time.
