All Categories
Clear Cap that will not mask light of first LED thus hardly see dark area in your lighting space. Make lighting effect more uniform
Applicable for all IP20 10mm strip light (2 solder pad) in different LED density ranging 30~120 LEDs per meter, even workable to strip light with 3M VHB red foam adhesive tape
Workable to PURE SILICON coating waterproof without stripping silicon coating
Pin will pierce FPCB of strip light from back and get contact to circuit. So it is workable with a led strip light with very wide thickness range
With fixing bar on cap and piercing contact design, connector can grip strip light tightly,never worry strip light or wire moving out of connector
A 10mm wide non-waterproof strip light gapless connector. Hardly see dark gap in your lighting area wiht help of clear cap. Designed to work under big current that is up to 5A saving.Make your connection solid,reliable and easy. Workable Strip Light Normal non-waterproof single color SMD5050,SMD5630,SMD5730,etc Other IP20 LED tape light that is 10mm wide with 2 solder pad Specially work with PURE SILICON coating waterproof LED strip light that is 10mm wide with 2 solder pad. Package Include 10 pcs of Gapless LED Strip Connector Installation Guide Turn cap up for 45 degree around Remove coating paper of adhesive tape at back for 2 CM around Insert strip light (above pin) Clamp cap down with a "click" sound Repeat step 1~4 to finish connection at another end (ensure polarity match at two end) Technical Data Working Voltage:Below 24V Max Current of Pin: 5A Pin Quantity: 2 pin Workable Strip Light Width: 10mm Workable PCB Thickness:0.2~0.35 mm Types: Strip to Strip Joint / Board to Board Joint Heat Resistance: 105℃ Working Ambient TEMP.: -20~50℃ Unit Dimension: 19.55*14.6*7.7 mm