Banding Tools for Strapping Tensioner & Cutter Manual Strapping kit for 1/2" - 3/4" - 5/8" Wide Polyester and Polyproplyn Strap -Blue

Pay with

Banding Tools for Strapping Tensioner & Cutter Features

• All steel construct ensures durality and long lifetime

• Used in combination with the strapping sealer tool. PP/PET Strap recommend from 1/2 to 3/4 inch width and open seal of the same size

• Can be used horizontally or vertically on flat surface. Grips, tensions and cuts efficiently and easily.

• Ideal for multi-purposes for warehouse package dock, moving, garage storage, securing cargo during transportation

• Edge protectors are recommended to help spread the load at corners and reduce damage to the load by the tensioned strap

About Banding Tools For Strapping Tensioner & Cutter

Description WHAT ELSE YOU NEED 1)plastic strapping 2) strapping open seal or strapping self-lock buckle (no need for sealer) 3) strapping sealer or sealess sealer (no need for seals or buckles) HOW TO CHOOSE STRAPPING Differenct features: 1) polypropylene is an economical material designed for light to medium duty unitizing, palletizing and bundling This product offers higher elongation at break but tends to have irrecoverable dead stretch with constant stress polypropylene strapping will lose about 50% of the applied tension within one hour, and that this tension loss is accelerated with increases in ambient temperature. 2) polyester is one of the strongest plastic strapping products and are used as a viable alternative to steel strapping in some industries Polyester provides excellent retained tension on rigid loads. Its excellent recovery properties help a load absorb impact without strap breakage. Choose the appropriate strapping according to your needs HOW TO STRAPPING 1. Squeeze the handle to lift the gripping jaw 2. Thread the free end of the strap through the back of the tool under the gripping jaw, leaving approximately 1″ of overhang front of the tool. 3. Wrap the strap around the load 4. Take the end of the strap still attaching to the coil and thread it through the cutter housing and the shaft slot 5. Swing the handle to tension the strap 6. Place seal on both straps and using the sealer to crimp 7. Squeeze the handle to cut the strap USE EXAMPLES INCLUDE: Bundling items together for handling and shipment: newspapers, pipe, lumber, concrete block, etc. Attaching items to pallets, skids, and crates Reinforcing wooden boxes, crates, and corrugated boxes, such as gaylords Holding bales of agricultural products or textiles Securing coils of steel or paper