Cutlery Rivets for DIY Handles & Knife Handle Repair - USA Size (0.187 x 0.115 x 0.520 Inch) - (Brass) - (10 Pk)

Pay with

Cutlery Rivets for DIY Handles & Knife Handle Features

• (10) Cutlery Rivets USA Size (0.187 x 0.115 x 0.520 Inch)

• Rivet Material = (2) Brass | Head Diameter = 0.187 in. (ea.) | Head Thickness = 0.063 in.

• Shaft Length = 0.43 in. | Shaft Diameter = 0.11 in. (.115 in. Joined)

• All sizes and dimensions = USA Standard

• Ultra high quality parts for serious knife enthusiasts. Can be used for new handle creations or repair. More details below…

About Cutlery Rivets For DIY Handles & Knife Handle

Commonly referred to as a "Cutlery Rivets" these 2-part press-rivets are excellent when used for knife handle fasteners. To use them, drill a through-hole through your handle material for the shaft to pass through, then create a larger stepped hole for the head to recess in. The head on both sides of the rivet will then be sanded along with the surface of the handle material to create a seamless surface connection. Cutlery rivets have been used for many years to fasten handles on some of the most famous knives ever made. Knife handle rivets are extremely easy to use. They are joined by using a hammer and anvil surface to press the two parts together and can be epoxied for a permanent handle treatment. Similar to handle pins and knife handle screws, cutlery rivets are easy to sand flush for the completed finish. This offer is a 10 pack. Specifications Cutlery Rivet Head Thickness = 0.063 in. Head Diameter = 0.1875 in. Shaft Length = 0.43 in. (F) / 0.37 (M) Shaft Diameter = 0.11 in. (F) / .115 in. (Joined) Overall Length = 0.520 in. (Joined) Material = Brass Sold As: 10 Pack = (10)(1 Cutlery Rivet = (1) Male + (1) Female)