We specialize in hard to find items
All Categories
SHINE SING 3D Rapid Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing 500Gram Clear
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About SHINE SING 3D Rapid Resin LCD UV-Curing Resin 405nm
Resin Technical Parameters Solidify Wavelength: 405nm Bending Modulus: 1.882-2.385 Gpa Bending Strength: 59-70 MPa Hot Deformation Temperature: 80 ℃(176°F) Volume Shrinkage: 3.72-4.24% Tensile Strength: 36-52 MPa Tensile Modulus: 1.779-2.385 GPa Elongation at Break: 11% -20% Shore Hardness: 84D Glass Transition Temperature: 100 ℃(212°F) Density: 1.05-1.25 g/cm3 Notched Izod Impact Strength:44-49 j/m Shelf Life: 1 year Printing Setting Bottom exposure time(s): 30-60 s/layer Normal exposure time: 6-10 s/layer Note: The material’s actual properties depend on the printing process conditions, the design structure and its purpose, test conditions, etc. Precautions -Shake the bottle before pouring the resin into the tank. -Wear gloves and masks before using to avoid direct skin contact. -Avoid printing too many items at the same time. Divide your production into several stages to achieve better results. -Clean finished models with IPA or Ethanol. Dip in alcohol bath and/or clean with soft brush remaining resin on the model. -Recommended storage temperature 20°C - 30°C. -To preserve the resin’s characteristics, filter the liquid after each printing process and protect the containers from direct sunlight.
