DriTac Eco-DriBloc Moisture Control - 1-Gallon

Pay with

About DriTac Eco-DriBloc Moisture Control - 1-Gallon

DriTac 7100 Eco-DriBloc is a one-component, fast drying concrete moisture control system and adhesive isolation membrane that allows installers to apply a moisture mitigation system and install their resilient floor the same day with a 3-hour dry time. This roller applied, extremely easy-to-use 2-In-1 product offers zero VOCs and zero solvents. Eco-DriBloc can also serve to isolate old adhesive residue. DriTac 7100 Eco-DriBloc is very low in odor and can reduce up to 15 lbs. of concrete moisture vapor transmission down to 3 lbs. in 24 hours, per the ASTM F1869 Calcium Chloride Test Method and is warranted for up to 90% RH, per the ASTM 2170 Relative Humidity Test. 1-Coat = 12 lbs Calcium Chloride – 85% Relative Humidity and 175-225 SF/Gal Spread Rate 2-Coats = 15 lbs Calcium Chloride – 90% Relative Humidity and 175-225 SF/Gal Spread Rate DriTac 7100 Eco-DriBloc is available in 1- and 4-gallon pails and is for use under most types of floor coverings, including LVT/LVP, fiberglass back sheet vinyl, carpet tile, cork tile, cork/rubber/foam underlayments, laminate flooring and all other floating floors.