We specialize in hard to find items
All Categories
Tupavco Ethernet Extender Kit (Pair) LAN Network Cable Range Extension (up to 7000ft) TEX-100
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
Tupavco Ethernet Extender Kit (Pair) LAN Network Features
-
Ethernet Extender kit improves the network cable range limit of 328ft (100m) up to 7000ft
-
LAN Extender can use CAT5/CAT6 or phone cable to pass the signal to the remote location (RJ45/RJ11)
-
Ethernet Range Extender is easy to set up, no driver or software installation needed
-
Kit comes in pair with preset for central and remote location and it's ready for use out of the box
-
Provides stable cable connection to remote devices like computer, camera, VoIP phone, modem, router
-
VDSL Extender boosts the range of a broadband signal using only 2 copper wires in phone or LAN cable
-
LED indicators for monitoring speed and activity; DIP switches to choose 30a/17a profile, SNR margin
-
Cost-effective solution to connect devices in separate buildings by existing cable infrastructure
About Tupavco Ethernet Extender Kit (Pair) LAN Network
Ethernet Extender Kit (2pc) TEX-100 VDSL2 is a high-speed, Long Reach Ethernet Booster/LAN Repeater with one RJ45 Ethernet port and one RJ45 VDSL port. Bridge modem use VDSL2 technology to extend ethernet wire service over single-pair phone line or CAT5 cable, CAT6 cable. VDSL2 Ethernet Extender features 100Mbps of symmetric data rate over telephone/phone wire or ethernet cable kit. Use two TEX-100 VDSL2 Extenders (Sender/Receiver) in CO and CPE mode to establish a point-to-point connection extension in your network. Features-Support flow control on Fast Ethernet port via PAUSE frame or Back Pressure-IEEE 802.1Q VLAN tag transparent-Easy PnP installation network booster broadband distance range extender-Selectable CPE and CO mode and VDSL2 profile (17a or 30a) via DIP switch are built in the ethernet repeater-Ethernet bridge VDSL2 profile mode (17a or 30a) for high data rate-Symmetric mode support the band plan G.997 and provide the symmetric transmission on both down and upstream-Asymmetric Provides highest line rate in short range -Selectable target SNR margin Specifications-Network Extender DIP Switch:CO/CPE mode,30a/17a Profile,Symmetric or Asymmetric,SNR margin 6dB/9dB-LED:ACT/LNK,10/100Mpbs,Half/Full Duplex,CO/CPE,Idle/Trained/Link-LAN Extender Interface:RJ-45,IEEE 802.3/802.3u/802.3x,10/100 Base-T Auto-Negotiation,Auto-MDI/MDI-X-VDSL Interface:RJ-45,DMT Encoding,ITU-T G993.1/993.2/G.997.1,Surge ProtectorPerformance - AWG24 LAN Cable/Phone Cable Wire:17a VDSL Profile-Down/Up stream1000ft-100/72 Mbps2000ft-42/463300ft-18/134000ft-16/75000ft-12/36000ft-9/26500ft-5/2 30a VDSL Extender1000ft-100/100 Mbs2000ft-40/452000ft-40/453000ft-22/194000ft-16/75000ft-12/36000ft-8/27000ft-5/2The actual data may vary depending on copper wire and environment.
