12V DC Digital Cooling/Heating Thermostat Temp Control -50-110 °c Temperature Controller 10A Relay With Waterproof Sensor Probe

Pay with

About 12V DC Digital Cooling/Heating Thermostat Temp

Instructions for use： Connect the power supply and equipment, the measuring temperature is displayed, press the "SET" button, press " + or - " to set the desired temperature (long press " + or - " to quickly increase or decrease)press "SET" to confirm the setting and return, controller automatically performs the relay ON/OFF.the thermostat output is 10A relay, meet a variety of high-power loads, LED Indicator: LED off indicates the relay off; Lighting,indicates the relay is closed. Digital LED Tubes: "LL" indicates sensor open"HH" indicates overrange, the relay will be forcibly disconnected; "---" indicates high temperature alarm Long press the "SET" button to enter the main menu settings, press " + or - " to switching between P0-P6,then long press "SET" or 10 seconds without keystrokes to confirm the setting and return. Buttons: P0 :Cooling / Heating; Range: C/H; Default: C P1 :Hysteresis Setting; Range:0.1-15; Default: 2 P2 :Highest Setting Limit; Range:110; Default: 110 P3: Lowest setting Limit; Range:-50; Default: -50 P4 :Temperature Correction; Range:-7-7°c; Default: 0°c P5: Delay Start Time; Range:0-10 Minute; Default: 0 P6: Key Tone Switch; Range:0-110; Default: Off When the Thermostat is power off, long press "- or +", you can restore the factory settings Package Included: 1x Digital Temp Controller