X

Insultab 3015000C1A5 HS-105 1-1/2", 25' Clear Polyvinylchloride Heat Shrink Tubing

Product ID : 18186858


Galleon Product ID 18186858
Model
Manufacturer
Shipping Dimension Unknown Dimensions
I think this is wrong?
-
3,086

*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown

Pay with

About Insultab 3015000C1A5 HS-105 1-1/2", 25' Clear

This Insultab 3015000C1A5 HS-105 clear heat shrink tubing has a 1-1/2" inside diameter (ID), is 25' long, and is suitable for bundling wires, repairing insulation, insulating wires and wired connections for protection from abrasion or contact, and providing strain relief. It is made of PVC (polyvinyl chloride) for strength and resistance to chemicals, oils, moisture, salt water, fungus, and ultraviolet (UV) light. It has a 2:1 shrink ratio and a volume resistivity of 21.5 x 10 to the 12th power ohm-cm. It is Restriction of Hazardous Substances (RoHS) compliant, meets Underwriters Laboratories (UL) Subject 224 VW-1 standard for flammability, Canadian Standards Association (CSA) OFT standard for 600 volts, and ASTM International D3150 and Society of Automotive Engineers (SAE) AMS-DTL-23053/2 Class 2 standards for electrical insulation. This heat shrink tubing is suitable for a wide range of industrial, commercial, automotive, and military electrical applications. Note : The inner diameter of the tubing is 1.5”, but when measured flat, will be a minimum of 2.355”. Specifications Color Clear Shrink ratio 2:1 Expanded ID 1.5" (38.1mm) Maximum recovered ID 0.75" (19.05mm) Nominal recovered wall thickness 0.043" (1.09mm) Minimum recommended shrink temperature 100 degrees C (212 degrees F) Operating temperature range -20 to +105 degrees C Longitudinal shrinkage Approximately 15% Specific gravity 1.32 Tensile strength 3,000 pounds per square inch (psi) Elongation limit 300% Brittleness temperature -28 degrees C Dialectic strength 1,083 volts per meter (vpm) Standards met RoHS compliantUL Subject 224 VW-1CSA OFT rated for 600VASTM International standard D3150SAE standard AMS-DTL-23053/2 Class 2 Insultab manufactures general purpose tubing and heat-shrinkable tubing. The company, founded in 1953 and located in Woburn, MA, meets International Organization for Standardization (ISO) standard 9001:2008.