All Categories
Electrical Characteristics: Solar Panel: 5.5V 120mA 17% efficiency Battery: 3.7V 1200mAh lithium 18650 battery Light source: SMD 2835*36pcs Voltage: 3.7V Electricity: 330mA Wattage: 1.2W(ON),0.04W(dimlight) LED power: 6500K-7000K 280Lumens Motion Angle: 120° Distance: 3-8(normal 4M) High Light Delay: 30 seconds Lightning Mode: OFF/DIM Light/Hight Light Sensor: PIR motion sensor & lighting Sensor Product Features: 1.Integrated design of PIR motions sensor and night sensor 2.Recharges via Solar Panel 3.Over 12 Hours lighting time from one day of charge 4.Waterproof IP 65,heat proof and durable 5.Intelligent energy-saving Test Method: 1.Unlock the product,the light will last for 5s,then off.(this design is in order to test the product whether working) 2.Charge the light by direct sunlight around 8hrs. 3.Cover the solar panel with your hand.If the light is on,the product is working. Working Process Instructions: Step 1: Screw the holder on the wall and install the device on the holder Step 2: Unlock the light system by clicking the “on/off ”switch. Step 3: Charge the device under direct sunlight for 8 hours. Step 4: At night or in darkness,the light will auto turn ON once motion is detected by the PIR motion sensor within 4-8m/13-26ft. Step 5: When no movement is detected within the sensing area for 30 seconds, the light will turn to dim light to save power.