X
Konmison 1Set Mini CNC Lathe Air Cooled 500W
Konmison 1Set Mini CNC Lathe Air Cooled 500W
Konmison 1Set Mini CNC Lathe Air Cooled 500W
Konmison 1Set Mini CNC Lathe Air Cooled 500W
Konmison 1Set Mini CNC Lathe Air Cooled 500W
Konmison 1Set Mini CNC Lathe Air Cooled 500W
Konmison 1Set Mini CNC Lathe Air Cooled 500W
Konmison 1Set Mini CNC Lathe Air Cooled 500W
Konmison 1Set Mini CNC Lathe Air Cooled 500W
Konmison 1Set Mini CNC Lathe Air Cooled 500W

Konmison 1Set Mini CNC Lathe Air Cooled 500W Spindle Motor CNC 0.5KW with 52mm Clamps and 110V Mach3 Power Converter Spindle + 13pcs ER11

Product ID : 8552013
4.1 out of 5 stars


Galleon Product ID 8552013
UPC / ISBN 600346593800
Shipping Weight 4.74 lbs
I think this is wrong?
Model
Manufacturer Beauty Star
Shipping Dimension 11.46 x 7.83 x 6.77 inches
I think this is wrong?
-
Product is Out of Stock as of Feb, 12 2024
Want to monitor availability?
of brand new stock?
or
Need this item ASAP?
Check if this is available on Amazon
or available in other sites
Send us the link so we can buy for you

Pay with

Konmison 1Set Mini CNC Lathe Air Cooled 500W Features

  • Air Cooled Spindle - 110VAC MACH3 - Analog Input; Torque: 5000G/CM

  • High precision spindle run out 0.01-0.03; Speed: Up to idle up to 11000 rev / min

  • Operating voltage: 100VDC; Power: 500W; Spindle diameter: 52mm

  • Applied to Lathes, Mills, Car Hoists, Pumps and Conveyors, etc.


About Konmison 1Set Mini CNC Lathe Air Cooled 500W

CNC 500W Air Cooled Spindle Kit for DIY Engraving Package Included: 1 x 500W Air-Cooled Spindle Motor 1 x 110V Speed Governor with MACH3 1 x 52mm Mount Bracket 13 x ER11 collect 4 x Screws Features: Input: AC110V±10%50/60Hz Operating voltage: 100VDC Power: 500W Current: 4A Speed: up to idle up to 11000 rev / min Torque: 5000G/CM Insulation resistance: > 2 megohms Dielectric strength: 400V Spindle diameter: 52mm Chuck portion length: 45mm Chuck portion diameter: 16mm Motor length: 200mm High precision spindle runout 0.01-0.03 Power supply Specification: (and this spindle supporting the use of the) 13pcs ER11 collet set gripping range: 1MM to 7MM (1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm); Run-out tolerance 0.01mm (0.0006") ★★Note: 1. The mounting bracket is NOT threaded. You will need to bolt this to a threaded object for it to hold. The bracket has only clearance holes. 2. Suitable for light carving(wood or light aluminum) operations, NOT for high density aluminum or steel.