Buy Products not in the Philippines

Galleon.PH - Discover, Share, Buy!
StoneTech EPW12-32 Stone Enhancer, 1-Quart
StoneTech EPW12-32 Stone Enhancer, 1-Quart
StoneTech EPW12-32 Stone Enhancer, 1-Quart

StoneTech EPW12-32 Stone Enhancer, 1-Quart

Product ID : 3224242

Galleon Product ID 3224242
Shipping Weight 2.05 lbs
I think this is wrong?
Model EPW12-32
Manufacturer StoneTech
Shipping Dimension 7.5 x 4.3 x 2.6 inches
I think this is wrong?
Brand StoneTech
Hazardous Material Type Unknown
Package Quantity 1
Release Date 2010-08-16
Size Quart

*Price and Stocks may change without prior notice
  • 3 Day Return Policy
  • All products are genuine and original
  • Cash On Delivery/Cash Upon Pickup Available

Pay with

StoneTech EPW12-32 Stone Enhancer, 1-Quart Features

  • Superior water-based color enhancing impregnator sealer with stain protection

  • Designed for many types of interior surfaces

  • Provides coverage for 20-65 sq. ft. per quart

  • Made of a non-solvent formula

  • Protects up to 5 years on interior surfaces

About StoneTech EPW12-32 Stone Enhancer, 1-Quart

Features and Benefits Easier to use, water-based formula Enriches color Standard protection against most stains Interior use Where to Use Natural stone such as limestone, slate, travertine, sandstone, flagstone, tumbled stone, flamed stone & textured stone. Masonry & concrete. Directions Read entire label before using. Use only as directed. Test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for at least 72 hours prior to application. Be sure surface is clean, thoroughly dry and free of sealers, waxes and coatings. Not recommended for exterior surfaces. Avoid skin and eye contact. Wear protective eyewear and gloves. Ensure work area is well-ventilated during application and until surface is dry. Keep children and pets out of the area during application and drying. 1. Shake well before using. 2. Apply product evenly and liberally using a paint pad, low-pressure chemical-resistant sprayer, roller or brush. Avoid applying product on unintended surfaces. 3. Allow product to penetrate the surface for 15–30 minutes; denser material may require maximum time for Enhancer to penetrate. Keep surface wet with sealer, adding more product if needed to prevent dry spots, for the entire penetration time. Following penetration time, completely wipe surface clean and dry with absorbent towels. DO NOT ALLOW EXCESS ENHANCER TO DRY COMPLETELY ON SURFACE. 4. A second coat may be needed for porous, absorbent surfaces or if a darker appearance is required. Apply second coat 1 hour after first coat following directions in steps 1–2. 5. A full cure is achieved after 24–72 hours; foot traffic may begin in 6–8 hours. If needed sooner, cover the floor with red rosin paper to protect it until the recommended time periods have passed. 6. Clean tools used during application with water.


We have formed a skeletal team working from home to address your concerns and inquiries. We will prioritize addressing those with existing paid and confirmed orders.

To make sure we get your messages, please email us at [email protected]

We appreciate your patience

Be safe everyone!