4" (100mm) Dia. Black High Density Plastic Floating Spheres (100 Balls)

Pay with

4" (100mm) Dia. Black High Density Plastic Floating Features

• Blow molded HDPE or Polypropylene - Hollow & will float on any liquid

• No welt or rim on which chemicals can deposit - Being smooth, they ensure a tight surface cover

• Heating costs reduced by up to 75% - Reduction of liquid loss through evaporation by up to 90%

• HDPE maximum temperature: 176°F (230°F softening point) - Polypropylene maximum temperature: 230°F

• Reduction of ice formation in freezing conditions

About 4" (100mm) Dia. Black High Density Plastic Floating

Spheres float on surface of liquid in open tank and thereby greatly reduce the exposed liquid surface area - up to 90%. Dramatically diminish objectionable fumes and odors. Blanket of spheres also insulates heated liquid reducing evaporation and heat requirements. Ideal for plating tanks and similar open tank installations where the liquid surface can be covered with a blanket of spheres without impeding access to the tank for process purposes. Spheres are hollow and will float on any liquid. No welt or rim on which chemicals can deposit, and being smooth they ensure a much tighter surface cover. Polypropylene, non-toxic and able to withstand continuous working temperatures of 110° C (230°F) Polypropylene is suitable for use in most known chemicals. High Density Polyethylene generally suitable as above but with a continuous working temperature limitation of 80° C. (176° F) softening point about 110° C (230°F). High density polyethylene has better chemical resistance to certain compounds like oil, and other hydro-carbons. Also less stress cracking at low temperatures than polypropylene. Color white translucent except 100 mm, black for outside use. Cuts fumes by 90%. Reduces evaporation by 85%. Fuel costs 70%. All sizes are blow molded.