X

YaeTek Heat Roof Gutter De-icing Ice Snow Melter Cable Tape Kit, with Thermostat: On:6±3℃ Off:13±3℃ (100FT)

Product ID : 32005455


Galleon Product ID 32005455
Model
Manufacturer
Shipping Dimension Unknown Dimensions
I think this is wrong?
-
5,527

*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown

Pay with

About YaeTek Heat Roof Gutter De-icing Ice Snow Melter

The deicing cable may be installed when:There is no ice or snow on the roof:Do not use this cable to melt snow and ice that has already formed on your roof or in your gutters or downspouts, as you would not be able to attach the cable properly with the clips. Additionally, this cable was not designed to melt snow;rather, it simply provides a path for snow or ice that has already melted (meltwater) to flow to the ground.To solve ice dam problems when snow and ice are on the roof, contact a professional roofer for expert advice.To prevent future ice dams, you can install the deicing cable once the ice and snow have melted and before the next winter season.The temperature allows for lifting of the shingle tabs:In general, the temperature should be between 32° and 80°F (0℃and 27℃). Below 32°F(0℃), shingles are brittle and may break off when lifted to install the cable clips. Above 80°F(27℃), shingles may be warm and may tear when lifted to install the cable clips.Contains:-Cable-Cable spacers-Shingle clips-Labels for circuit breaker and ON/OFF switch -Operating Instructions in ENG,FRA and ESP.Using a 120 volt A/C outdoor receptacle that meets all of the following:- Is grounded.- Is ground fault protected.- Is on a circuit that has an appropriate current (amp) rating.- Has an on/off switch that has an indicator light(pilot light).- Is protected from the weather.- Is within 6 feet of the cable starting point on the roof.