Aideepen MCP73871 USB 5V DC Power Boost Solar Lipoly Lithium Lon Polymer Charger Board 3.7V/4.2V Battery Management Charger Module

Pay with

About Aideepen MCP73871 USB 5V DC Power Boost Solar

Aideepen USB/Solar Lithium Ion Polymer Battery charger Module Fearures: 3.7V/4.2V Lithium Ion or Lithium Polymer battery chargernt Charge with 5-6V DC, USB or 6V solar panel! It's perfect for outdoor projects, or DIY iPod chargers With a plug and play solution to charging batteries with the sun Automatic charging current tracking for high efficiency use of any wattage solar panel Use any 6V solar panel Three color indicator LEDs - Power good, Charging and Donent Low Battery Indicator (fixed at 3.1V) with LED output Set for 500mA max charge rate, can be adjusted from 50mA up to 1A by soldering in a resistor Will always draw the most current possible from a solar cell - up to the max charge rate! Smart load sharing automatically uses the input power when available, to keep battery from constantly charging/discharging Temperature monitoring of battery by soldering in a 10K NTC thermistor (not included) - suggested for outdoor projects where the battery may get hot (50u00b0C) or cold (0u00b0C). Easy to use: ①Pick up any of our many 3.7V/4.2V LiIon batteries, and a 6V solar panel. ②Plug the battery into the BATT port using a 2-pin JST cable and the solar panel into the DC jack using a 2.1mm adapter cable Put the solar panel outside (and keep the battery out of the sun, it needs to be kept cool!) to start charging. ③You can power another project like a Mintyboost at the same time by connecting to the LOAD output port Package included: 1*MCP73871 Battery charger Module