vbaxy Brake Bleeder Hose- One Way Check Valve Tube Bleeding Tool Kit for Motorcycle Clutch

Pay with

vbaxy Brake Bleeder Hose- One Way Check Valve Tube Features

• 【Material】: Aluminum body to resist corrosion from brake fluid,using soft tube for easy releasing or loosen

• 【One Way Check Valve 】Prevents air being drawn into the system

• 【Easy to connect】：Simply and easy to connect with the clips to motorcycle clutch for bleeding.

• 【Easy to bleed 】: Bleed motorcycle brakes fluid fastly with this brake bleeder hose.

• 【Remark】:This motorcycle brake bleeder kit looks simple, but really a good helper to get the brake fluid out.

About Vbaxy Brake Bleeder Hose- One Way Check Valve Tube

Motorcycle Clutch Brake Bleeder kit-Brake Bleeder hose- One Way Check Valve Bleeding Tool Tube. 🏍 Product Features: 【Material】: Aluminum body to resist corrosion from brake fluid,using soft tube for easy releasing or loosen 【One Way Check Valve 】Prevents air being drawn into the system 【Easy to connect】：Simply and easy to connect with the clips for bleeding. 【Easy to bleed 】: Bleed motorcycle brakes fluid fastly with this brake bleeder hose. 【Remark】: Simple, but really a good helper to get the brake fluid out from Motorbicycle and Car 🏍 How to Use: 1.Open the bleed nipple of the caliper. 2. Place one end of the hose onto the bleed nipple and secure with hose clip, remark: Please refer to the picture, and pay attention to the one way valve direction, as there is a mark on the aluminum body which is showing the brake fluid flowing dirction, the direction of arrow on the valve should be away from the caliper. 3.Prepare one container in advance to collect the brake fluid that will be flushed out of the system. 4. Once ready, Start pressing the brake Lever SLOWLY and topping up the fluid until all air has been flushed out, at the same time please make sure the fluid level in the mastercylinder reservoir is correct(not too Low). 5. Close Reservoir 6. Remove the hose from the bleeding nipple, put the cover of the nipple back and clean excess fluid. 7. Dispose of brake fluid safely and care about the environment. 🏍 Product Specification: Material: Aluminum + Soft Tube Total Length :18.89 in(480 mm ) Valve Length: 2.17 in(55 mm) I.D of Tube: 0.2 in(5 mm) O.D of Tube: 0.31 in(8 mm) Net weight: 1.1oz(33g) Package Includes: 1 x Brake Bleeder Kit(Three tube clips).