X

ITEQ Brake Fluid Liquid Tester Pen with 5 LED Indicators, Calibrated For DOT3 DOT4 Brake Fluid

Product ID : 27132766


Galleon Product ID 27132766
Model
Manufacturer
Shipping Dimension Unknown Dimensions
I think this is wrong?
-
1,105

*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown

Pay with

About ITEQ Brake Fluid Liquid Tester Pen With 5 LED

How to Use: 1. Turn on the brake fluid tester by pressing the button on top. A green light should light up. If the light does not come on, it may be time to change a battery 2. Unscrew the lid for the brake fluid reservoir, and take off the cap for the brake fluid tester 3. Dip the test probes into the brake fluid and the LED lights will indicate the percentage of water in the brake fluid 4. After testing, remember to screw the lid of the brake fluid reservoir back on tightly 5. The tester will automatically power off after 12 seconds of inactivity What to Do: The LED lights will indicate the percentage of water in the brake fluid: - Green: No water - Green/Yellow: Less than 1% of water - Green /Yellow/Yellow: Approx.2% of water - Green/Yellow/Yellow/Red: Approx.3% (Brake fluid should be changed) -Green/Yellow/Yellow/Red/Red: Approx.4% (Brake fluid must be changed urgently!) Please Note: The ITEQ brake fluid tester is calibrated for DOT4 and DOT3 brake fluids, and DOT4 is used in most cars produced since 2006 Replace the battery if the green LED indicator no longer lights up after you press the button Wash the test probe with tap water after every use In case of skin contact with brake fluid, thoroughly wash the affected skin or clothing with water Do not expose brake fluid to the atmosphere for a long time as it is highly hygroscopic Package: 1 x brake fluid tester(Battery Not Included)