All Categories
Product Structure Indrouce : The cutter blade is a double-sided blade with a total of four pieces, which are uniformly distributed on the outer circle. The blades can be replaced. The specific operation is: loosen the Phillips screws (four screws on each piece), remove the blade pressure plate and sampling blade, and Insert a new blade, press the blade holder, pay attention to make the blade openings tangential clockwise, and make the four blade openings on the same plane, and then tighten the Phillips screws. The bottom of the instrument has a ruled score, which is used to fix the sample for easy cutting and prevent the sample from slipping. Indruction : Put the tile need to be cut on the rubber mat fabric, put the disc sampler on the fabric, pull the locking device on the sampler, rotated about 90 degrees, hand held onto the cover, one hand holding the corrugated hand wheel, and exert a certain pressure, and then ripple hand wheel clockwise (angle greater than 90 degrees), then the circle and cut the sample. Sampler locking device after use , rotate to its original position, the blade is not exposed, to avoid hand injuries and other items. Note: The knife blade sharp instrument, not the use of the hand on the bottom, so as to avoid damage.