Electrically Conductive Adhesive, Carbon Filled Epoxy, Room Temperature Cure, AA-CARB 61, 2.5gm kit

Pay with

About Electrically Conductive Adhesive, Carbon Filled

AA-CARB 61 is an epoxy adhesive and coating formulation based on conductive carbon. AA-CARB 61 is recommended for electronic bonding and sealing applications that require both fine electrical and mechanical properties. AA-CARB 61 cures at room temperature or can be accelerated with mild heat to form a tenacious bond between similar and dissimilar substrates. GENERAL PROPERTIES: Appearance Black Cure Type Heat cure or Room temperature Benefits Continuity of conductivity High adhesion Wide operating temperature range Mix Ratio by weight 100:10 / Resin:Hardener Substrates Aluminum, copper, magnesium, steel, bronze, nickel, ceramic, glass, phenolic, G-10 epoxy glass boards Operating Temperature -50 to 145 °C Typical Applications Electronic bonding and sealing applications that require both fine electrical and mechanical properties. UNCURED PROPERTIES: Compressive Strength, psi 13,000 Specific Gravity, mixed 1.35 g/cc Pot Life 30 minutes CURE SCHEDULE: 15 minutes At 100°C 1 hour At 60°C 24 hours At 25°C MISC PROPERTIES: Volume Resistivity ohm cm < 40 Tensile Strength, psi 8,500 Shrinkage Linear 0.003 in/in Hardness, Shore D 85 GENERAL INFORMATION: For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). AVAILABILITY: This epoxy can be supplied in various different packages. Note that this product is not intended for defroster or back glass repair Call (888) 522-6742 for more information.