X
Wolfwhoop Q4-Pro 5.8GHz VTX with MMCX Antenna
Wolfwhoop Q4-Pro 5.8GHz VTX with MMCX Antenna
Wolfwhoop Q4-Pro 5.8GHz VTX with MMCX Antenna
Wolfwhoop Q4-Pro 5.8GHz VTX with MMCX Antenna
Wolfwhoop Q4-Pro 5.8GHz VTX with MMCX Antenna
Wolfwhoop Q4-Pro 5.8GHz VTX with MMCX Antenna
Wolfwhoop Q4-Pro 5.8GHz VTX with MMCX Antenna
Wolfwhoop Q4-Pro 5.8GHz VTX with MMCX Antenna

Wolfwhoop Q4-Pro 5.8GHz VTX with MMCX Antenna Connector and 0.01/25/200/400/600mW 37CH Switchable FPV Transmitter with Smart Audio Support OSD Configuring via Betaflight Flight Controller (Q4-Pro)

Product ID : 35220811
3.4 out of 5 stars


Galleon Product ID 35220811
Shipping Weight 0.04 lbs
I think this is wrong?
Model
Manufacturer Wolfwhoop
Shipping Dimension 5.67 x 3.23 x 0.39 inches
I think this is wrong?
-
1,545

*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
  • Electrical items MAY be 110 volts.
  • 7 Day Return Policy
  • All products are genuine and original
  • Cash On Delivery/Cash Upon Pickup Available

Pay with

Wolfwhoop Q4-Pro 5.8GHz VTX with MMCX Antenna Features

  • With solder pads,With MIC

  • With MMCX/UFL connector, You can choose the antenna connector as your like

  • This VTX is that you can mount it on top of your mini FC/PDB stack thanks to the 20x20mm mounting pattern

  • 0.01mW-Power up and test your fpv system during a race with zero interference with any neighbor active channels

  • 7-24V input with 5V output, Support parameter remotely adjusted by Betaflight, flight controller, OSD, Compatible with betaflight 3.2 3.3 3.4 3.5 or higher version


About Wolfwhoop Q4-Pro 5.8GHz VTX With MMCX Antenna

It’s similar to the Q4 but have solder pads, MIC and MMCX/UFL connector. One cool feature about this VTX is that you can mount it on top of your mini FC/PDB stack thanks to the 20x20mm mounting pattern. OSD configuration using FC Uart Built-in BEC: 5V camera @under 300mA One button frequency and power setup 25/20/400/600mW power switchable Specification: Input voltage: 7-24V Extra supply: Smart audio, MMCX/UFL connector, MIC Built-in BEC: 5V camera @under 300mA Output power: 25mW:100mA @5V 200mW:200mA @5V 400mW:250mA @5V 600mW:320mA @5V Antenna connector: MMCX/UFL Port connector: Solder Pads Dimensions: 26(W)X26(D)mm, 20X20mm(hole) Weight: 5.4g(excluding antenna) Kit contents: 1XVTX, 1XMMCX pigtail Note : 5645/5925/5945(E4/E7/E8) are not available sue to FCC regulation. Selecting 5645/5925/5945(E4/E7/E8) will be invalid action. 37 channels are all above 5650 and below 5925MHz, which are legal to use in the USA with an amateur radio license. This equipment is being sold under FCC’s amateur radio rules. Operators must require amateur radio license to operator legally in the US. Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC. By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. More information related to ARL, please go to http://www.arrl.org/getting-licensed.