Autool CT-200 Automotive Fuel Injection Systems Cleaning Tools CT200 Fuel Injector Cleaner and Tester 110V Automotive Fuel Injection Systems Cleaning Tools

Pay with

About Autool CT-200 Automotive Fuel Injection Systems

FEATURES: 1. LED display; 2. Ultrasonic cleaning trough built-in; 3. Tool trolley make it more conveniently to operate; 4.Equip with high quality SIEMENS pump, make it endurable; FUNCTIONS: 1.Ultrasonic cleaning , dismantle the carbide of the injector; 2.injector test. stimulate engine runing condition, test injector in different speed range, Check and test injectors’s injection situation:atomization/sprayingangle/spraying mount/spraying uniformity; 3.leakage and block test; 4.Uniquely designed various compound bonder for all kinds of side-inlet injectors; 5.With reverse flush function, to clean inside out, to improve clean efficiency; 6.With a set of adaptors to clean injectors without dismantling it from the engine; The CT200 cleaning machine how to work: 1 Clean injector's outside with gasoline or cleaning liquid before open machine 2 Putting injectors in ultrasonic bathtub after the outside of injector are free of dirt. 3 Turn on ultrasonic system, pulsed allowing the ultrasonic energy to dislodge any particles even build-up inside the injectors. 4 Fixed injectors on main machine. 5 Testing injectors for resistance, shorts, and current draw. 6 Performing leak test, spray pattern, and flow rate testing on flow bench. 7 The injectors are now returned to the flow bench for retesting of all functions. Ultrasonic cleaning: 1.The cleanser added into the ultrasonic cleaner just soaked the injectors’ needle is suitable. 2.Before the ultrasonic cleanser is added into ultrasonic cleaner, do not turn on the ultrasonic cleaner. Otherwise, damage may be incurred. 3.Strictly prohibit to put the pulse signal cable or its connecter into the cleanser, otherwise damage will be incurred. 4.The continue work time of the ultrasonic cleaner don’t be more than 30min, otherwise it will shorten the life.