We specialize in hard to find items
All Categories
ETCR9500 Wireless High Voltage Ratio Tester Meter Wireless Maximum Distance of 30M with Data Storage Function
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About ETCR9500 Wireless High Voltage Ratio Tester Meter
Shipping Policy : Battery Not Included During the Shipping Jaw size: High pressure pliers: Φ48mm; Low pressure pliers: 25mm x 30mm LCD size: 44mm×27mm (with backlight) Range: High Pressure Clamp: AC 0.00mA～1200A; Low Pressure Clamp: 0.01mA~10.00A Resolution: 0.01mA Accuracy: ±1%rdg±3dgt (23°C±5°C, 80%r or less) Data Storage: 3000 Groups Automatic shutdown: 15 minutes or so automatically shut down Structure: Anti-drip II Transmission: Wireless transmission, the maximum distance of about 30 meters straight line transmission, can penetrate multi-storey building barriers No signal indication: "No signal" is displayed dynamically when the receiver does not receive the transmission signal Interference: Avoid 315MHz, 433MHz same-frequency signal interference Measurement method: Clamp CT, non-contact measurement, integral method Frequency: 50Hz, 60Hz automatic identification Shift: Automatic shifting Low-voltage current clamp wire length: Standard 2 meters (can be lengthened according to the site distance, to achieve 0 to 50 meters distance online monitoring) Data Hold: Press HOLD key to hold data in test mode, "HOLD" symbol display Data review: "MR" symbol indicates that the data can be read up and down Overflow display: Overrange overflow function: "OLA" symbol display Line voltage: Line test below 60KV (with 5 sections insulation rod operation) Measurement time: 0.5 seconds/time Voltage alarm: When the battery voltage is lower than 4.8V, the battery voltage is low Insulation rod size: Outside diameter Φ32mm, 1m/section (5 sections in total) Size: High pressure tester: 255mm x 76mm x 31mm; Receiver: 170mm x 75mm x 30mm; Low-voltage current clamp: 170mmx70mmx38mm Power supply: DC 6V (7# battery 1.5V x4)（Battery not included in the package）
