All Categories
pecifications: Sticker Width:3.8cm/1.5" Sticker Belt Length:3.2m/10.5ft Net Weight: 220g/ 7.8oz Material: PVC Rubber Color:White Installation instructions: 1. Thoroughly remove the original silicone sealant with the knife. 2. Use organic solvents (thinner), such as rubber water, gasoline, etc., to clear the surface residue. 3.The surface is completely dry. 4. Installation indoor temperature range is best around 25 degrees, too cold place can be heated by electric hair dryer viscose, in the paste. 5. Remove the plastic film on the back of the viscose surface, fold it to 90 degrees, and paste it on the bathtub and the wall surface. 6. 90 degrees when the corner of the paste, the docking side should be cut into 45 degrees to the interface. 7.After compaction, 8 hours to 10 hours later can be used.