We specialize in hard to find items
All Categories
8L Thermolysis Industrial Water Chiller CW-3000 Water Chiller Machine for 80W CO2 Glass Laser Tubes Kit for CNC Engraver Engraving Machines 110V…
Share Tweet
of brand new stock?
or
Need this item ASAP?
Check if this is available on Amazon
or available in other sites
Send us the link so we can buy for you
8L Thermolysis Industrial Water Chiller CW-3000 Features
-
★Specifications - Cool Capacity is 50W / ℃; Forces circulation, 8L cooling tank capacity; High cost performance, low failure rate.
-
★Design for - Comprehensive reference to the international radiator - type cooling system; It is designed for cooling the one CO2 glass laser tube under 80W of the laser engraving and cutting machine.
-
★Features - It's a small thermolysis water cooler with enclosed water tanks and Professional forced air-cooling radiator; Equipped with alarm output port with completed water flow and over high temperature ALARM functions.
-
★Advantages - CW-3000 laser water chiller is suitable for small water cooling device; Can provide stable working conditions for laser devices.
-
★Used for - It is designed for cooling the one CO2 glass laser tube under 80W of the laser engraving and cutting machine.
About 8L Thermolysis Industrial Water Chiller CW-3000
Features: 1. Comprehensive reference to the international radiator - type cooling system; 2. Small thermolysis water cooler; 3. With completed water flow and over high temperature alarm functions; 4. Enclosed water tanks; 5. Professional forced air - cooled radiator; 6. Equipped with alarm output port. Advantages: ▲ Water can be used for a long time; ▲ High heat dissipating capacity and not easy to be blocked; ▲ Alarm output port can quickly protect sensitive components; ▲ Specific disconnection alarm securing protection; ▲ Cool Capacity is 50W / ℃; ▲ Forces circulation, 8L cooling tank capacity; Installation: Industrial cooling machine’s installation is very simple, the new machine for the first time using, you can install it as following steps. 1. Open the package and check the machine and all accessories. 2. Open the mouth screw on the top of machine, add cooling water (Please don’t power the machine without water). 3. Connect the inlet and outlet hose between water cooler and laser engraving machine. 4. Connect the power cable, turn the power switch (Note: Don’t let the water overflow). 5. Check the radiator water level again (Keep the distance between water level and mouth is 80 – 150mm). Package List: 1 × CW3000 Water Chiller Machine 1 × Power Line (US Plug)
