X

Enerpac PAMG-1405N Turbo II Air Hydraulic Pump with 4 Way Manual Valve and 4.2 Liter Reservoir

Product ID : 16085826


Galleon Product ID 16085826
Model
Manufacturer
Shipping Dimension Unknown Dimensions
I think this is wrong?
-
137,733

*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown

Pay with

About Enerpac PAMG-1405N Turbo II Air Hydraulic Pump With

The Enerpac PAMG-1405N Turbo II two-speed hydraulic air pump is for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately) in plant maintenance, fabrication, production, bolting, vehicle repair, and other applications where compressed air is the preferred power source. It has a four-way control valve for advancing, retracting, and holding a double-acting cylinder. It has an inlet air-pressure range of 25 to 125 psi and can start at low pressure. This two-speed pump requires fewer cycles to move a load than a similarly rated single-speed pump, increasing productivity. The pump is controlled by a treadle that can be locked for continuous operation. An internal pressure relief valve helps protect the pump from overload. The cast aluminum air motor resists corrosion and wear, and the motor and one-piece piston are designed to minimize air consumption. The motor assembly is fully serviceable, and the reinforced reservoir can withstand harsh conditions. The pump has a return-to-tank port for remote valve applications. The pump has 3/8" and 1/4" National Pipe Taper (NPT) threads ports for connecting to an air supply or attaching a hose or gauge (sold separately).SpecificationsMaximum operating pressure, at 85 psi inlet pressure10,000 pounds per square inch (psi)Maximum output flow rate, per minute, at 100 psi60 cubic inchesMaximum output flow rate, per minute, at 10,000 psi10 cubic inchesUsable oil capacity230 cubic inchesInlet air-pressure range25 to 125 psiAir consumption, at 100 psi12 standard cubic feet per minute (scfm)Hydraulic air ratio100:1Maximum operating noise level76 deci