Shore Durometer A Digital Shore Hardness Tester Meter with Stand Shore A Durometer Rubber Tester for Testing Plastics Various Rubbers Multi-Fat

Pay with

Shore Durometer A Digital Shore Hardness Tester Features

• 👍【Parameter】- Total measure force: 10N; Resolution: 0.5HA; Outside pressure: 1kg; Pressure needle top cone angle: 35°; Needle stroke: 2.5mm; Needle point size: 0.79mm; Dial Scale: 0~100HA; Max test height: 90 (mm)

• 👍【DIGITAL DISPLAY】 - The shore a hardness tester is equipped with LCD display, it will be more accurate to diretly read the test results. What's more, the alloy probe can be used to be more accurate input and measure the hardness of rubber and plastic products.

• 👍【Wide Application】- Shore a durometer is a common measurement used for determining the hardness of many plastic and rubber products. Shore a hardness tester is an important tool for anyone that does a lot of work with materials. Durometer in the shore a hardness range which is suitable for measuring soft materials like soft rubber, foam, leather, plastics, etc.

• 👍【TEST PRINCIPLE】- A steel press pin with a certain shape is pressed vertically into the surface of the sample under the force of the test force. When fully conforming to the surface of the sample, the tip end surface of the pin has a certain extension length L with respect to the plane of the presser foot. The value of the L is used to show the Shore hardness. The larger the L value is, the lower the Shore hardness is, and vice versa.

About Shore Durometer A Digital Shore Hardness Tester

【Kindly Note】: the battery is not included because of transport security, suggest you match one CR2032 Lithium Manganese Dioxide Button Cell. Specification ▼For the Shore A Durometer Measurement range: 10-90HA Size of pinhead section :0.79mm Pressure Needle Range:0-2.5mm Test force 10 (N). Net weight: 0. 5 kg. Material: Stainless wheel, plastic Dimension: 115* 60* 25 (mm). Maximum allowable height: 90 (mm) ▼The Test Stand Article number: LAC-YJ. Measurement range: 0-10. Test force: 10 (N). Net weight: 5.5 kg Package Content: 1× Shore A Durometer 1× Test Stand Operation Guide: The Shore A Durometer: 1. Before using, check that the display screen of the hardness tester should show "000" in the free state (if "00" is not shown, you can press the ZERO key to return to zero). 2. When the hardness tester is pressed on a flat base level (glass or metal platform), the display screen should show 100 ±1 degree. If it cannot be accurately displayed, the hardness tester cannot be used, and it is best to send it to the factory for adjustment. 3. Rubber samples shall be prepared in accordance with the requirements of GB/T531, plastic samples shall be prepared in accordance with the requirements of GB2411, and samples of rubber microporous materials shall be prepared in accordance with the requirements of HG/T2489. 4. If possible, the rubber sample shall be adjusted at the laboratory standard temperature before testing according to the GB/T2941 and GB/T2918 regulations, and then be determined. Maintenance: After using, wipe & put it in the instrument box, placed in a dry place, avoiding moisture, measuring frame should often be wiped, using a small amount of anti-rust oil to prevent rust, and add in the active part of the No 20 oil.