Avanti Membrane Technology Drinking Water Faucet Connector - 1/4" tube OD x 7/16"-24 UNS, quick-connect fitting & thread - QF-FF04

Pay with

About Avanti Membrane Technology Drinking Water Faucet

Applications · Reverse Osmosis Systems · Drinking Water Filtration Systems · Water Coolers · Coffee Machines · RVs · Misting Systems · Point-of-Use Filtration Systems · Beverage Dispensers · Ice Makers Food-Grade Quality · Our fittings are produced with FDA approved material and can be used in food quality applications Portable Water Applications · Our fittings are suitable for potable water applications with a maximum chlorine concentrate of 4 ppm · Direct exposure to sunlight will reduce fittings' service life and may lead to failure · All fittings and tubing should not be used near heart emitting appliances · For cold water applications only Technical Specifications · Body: made of FDA-approved Polyacetal and Polyoxy Methylene · O-ring: Nitrile (NBR) · Collet: Polyoxy Methylene and stainless steel · Working Pressure and temperature Range: Maximum 150 psi @ 70°F (10.3 bar @ 21°C) / 60 psi @ 140°F (4.1 bar @ 60°C); Minimum 33°F (1°C) Installation and Testing · Fittings and tubing installations should be inspected by pushing and pulling on the connection points and be pressure-tested prior putting into service · Fittings should not be exposed to excessive side loads and caution should be taken to prevent undue stress and excessive side loading