Dwyer Series 478A Differential Pressure Digital Manometer, + or - 1.5% Accuracy F.S., Battery Operated

Pay with

About Dwyer Series 478A Differential Pressure Digital

The Dwyer Series 478A digital manometer provides positive, negative, and differential pressure measurements, and is used to perform single-pressure measurements and to set supply pressures, verify pressure switch operation, adjust regulators, check pneumatic systems, and computer peripherals. The meter is suitable for use with air and compatible gases, and has an accuracy of + or - 1.5% of full scale. The extruded aluminum case provides durability. The four-digit LCD displays the pressure measurement. The zero function nulls minor pressure differences before measuring, min/max display provides comparative data, and display hold retains last reading when the display cannot be seen during testing. SpecificationsPressure typesPositive, negative, and differentialMedia typeAir and compatible gasesCase materialExtruded aluminumPressure unitsinH2O, mmH2O, bar, mbar, psi, inHg, mmHg, kPaConnection type3/16" or 1/4" inside diameter (ID) tubingMaximum pressure5 gauge psiDisplayFour-digit LCDTemperature limits0 to 140 degrees F/-17.8 to +60 degrees CCompensated temperature limits32 to 104 degrees F/0 to 40 degrees CDimensions6-17/32 x 2-13/16 x 29/32 (H x W x D)Power9V alkaline battery (included)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive,