Boston Gear G Series Miter Gear, 1:1 Ratio, 20 Degree Pressure Angle, Straight Miter, Plain Bore, Brass

Pay with

Boston Gear G Series Miter Gear, 1:1 Ratio, 20 Features

• Straight miter 90 degree mesh transmits mechanical power between perpendicular shafts

• Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles

• Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

• Unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion

About Boston Gear G Series Miter Gear, 1:1 Ratio, 20

This brass Boston Gear G series miter gear has a 20 degree pressure angle (PA) and a straight miter to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This gear has a plain bore, is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability, and has unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion. The 20 degree pressure angle provides a lower contact ratio between gears than a 14.5 degree pressure angle, resulting in higher load capacity. This gear is intended for use only with identical gears because miter gears can mesh only with gears that have the same pressure angle, number of teeth, and diametral pitch (number of teeth per inch). This Boston Gear miter gear is suitable for use in a variety of commercial and industrial applications, such as construction equipment, aeronautics, conveyors, and manufacturing equipment, among others.Miter gears have a blunt-end cone shape with teeth along the cone face and are used for transmitting torque and motion between perpendicular rotating shafts. A miter gear's pressure angle (PA), spiral angle, diametral pitch (also called DP or pitch), and its material are important factors to consider when purchasing. Gears come in several types for use in different power transmission configurations and for different applications, including spur gears (for rotating shafts parallel to each other), change gears (to increase or decrease torque and speed), helical gears (for high rates of rotational speed), internal gears (where one gear is nested inside the other), rack and pinion gears (for turning rotational motion into linear motion), and worm gears (for perpendicular shafts in tight spaces and quiet operation). Gears are suitable for use in the agriculture, automotive, construction, mining, and packaging industries, and can be fou