Donner Amp Attenuator, EMO AMP Box Controller Signal Converter Guitar Effect pedal with Mute Footswitch

Pay with

Donner Amp Attenuator, EMO AMP Box Controller Features

• High quality Electronic components and circuit design keep your tone clear and pure. Keep the dynamics and tone of your amp’s sweet spot at lower levels.

• True bypass. Running through the 【FX loop】 and controlling the amount of signal sent to the power section. Let you really push the front end of your amp for the natural feel and tone.

• Easy-to-use passive attenuator. Passive design doesn’t require any power. The LED only displays whether the pedal is on or not.

• Set output level to minimum immediately by tapping MINIMUM footswitch On board knobs and switch provide flexible sound character.

• DC 9V Adapter power supply. (plug polarity is positive on the barrel and negative in the center).(NOT INCLUDED)

About Donner Amp Attenuator, EMO AMP Box Controller

IntroductionAre you still worrying about your neighbors’s complaints when you’re rocking loud at home? Try this EMO- AMP Controller! This tiny passive attenuator is designed for connecting to your amp’s FX Loop jacks: get connected, set a level and done.Do you own a really loud amp with an FX loop, or just want to be able to get that cranked tone? Then you need one of these. Specifications1.Power Requirement: 9V DC center negative2.Current Consumption: 10mA3.Dimensions: 42x93.5x52mm4.Weight: 220gConnections & ControlsA：DC IN POWER JACK:For supplying LED only. Use a 9-volt DC regulated by AC adapter, 500mA (plug polarity is positive on the barrel and negative in the center).B: LEVEL KNOB:Controls the output level.C: RETURN JACK:1/4”mono audio jack，for connecting amp’s FX loop send jack.D: MINIMUM FOOTSWITCH AND LED:Tap the footswitch to immediately set amp output to minimum. In this case, the LED will lit up.Note: connecting to amps with serial FX loop is recommended.E: SEND JACK:1/4" mono audio jacks, for connecting amp’s FX loop return jack.