All Categories
Perfect photocell light sensor for outdoor lighting and photocell button night time Outdoor lighting controller for home safety; this outdoor light controller automates lights, lamp posts or lanterns in the driveway and entryway so that your house will be well-lit and will less likely attract burglars
LED compatible photocell , incandescent, fluorescent, mercury vapor and sodium bulbs : with the photocell light sensor, the outdoor lighting remote control can sense the amount of sunlight and automatically switches on at dusk and off at dawn. this is low voltage photocell replacement and saves you the trouble of having to remember to switch it off at certain times
Smart outdoor safety and security control: led flood light outdoor with photocell time delay function in the outdoor lights remote control eliminates flickers and false on/off triggers caused by stray dogs or cats
Outdoor post eye light control turns lights on at dusk and off at dawn; this remote control for outdoor lights has a heavy-duty case to protect it from the elements, dirt and dust
Dusk to Dawn light control: LED, fluorescent, 120V 60Hz, 1800W Tungsten, 1100VA Ballast; incandescent, halogen, mercury vapor, high pressure sodium, and CFL compatible
PhotoControl Button, PhotoElectric Unit, Light Responsive switch, Automatic Dust Till Dawn Lightning Fixture Solution, PECU EZ-346A. Ideal Replacement PhotoControl For Pole Lanterns, Mercury Vapor Lights, Twin Floodlights, Entry Lights, Area Lights, Walkway And Parking Lights, Ideal for outdoor post lamps, driveway lights or security lampsOn at dusk and off at dawn automatic scheduleCan also be used to control indoor lightsHelps contain energy costs once installedFits into a standard outlet box, post lamp or wall packLighting Type: Use With Single Or Multiple Outdoor Lights Applications Installation Instructions: Read All Instructions Completely Before Beginning Installation. ★Use With Weatherproof Wall Plate Having 11/16 Diameter Mounting Hole ★ Use only U. L. Listed wire connectors (not included). All metal strands of wires MUST be completely inside wire connectors. Wrap electrical tape in multiple layers to further secure the connections. ★Connect the red wire from the Photo Control to the black wire of the light fixture. ★ Connect the black wire from the Photo Control to the black (hot power supply) wire. ★ Connect all of the white wires (neutral) together. ★ The body of control must be located inside weatherproof electrical enclosure. Insert the nipple through the face plate hole and screw the nut on enclosed gasket tight enough to make a weatherproof seal. If the surface is uneven, apply RTV silicone rubber sealing compound before installing photocontrol. ★ Turn on power. Photo Eye has up to 2-minutes delay when turning the power On/Off. Troubleshooting Guide: 1. If lamp cycles during day, check that black and red wires are not reversed. 2. If lamp cycles during night then somehow reflected light is falling on photo-eye. Use black electrical tape to partially obstruct the sensor to limit reflected light from entering photocell. 3. Will not work with 12V/24V low voltage lands