All Categories
This aluminum alloy mini video camera slider is specialized to support your camera/camcorder for video recording, stably and smoothly. Small size and portable design, the length is only 28cm and the weight is only 538G. The slider is equipped with 1/4 inches and 3/8 inches threaded holes for different photographic devices, a bubble level to indicate your slanting Degree. You can adjust the middle rod along the diagonal for common shooting, achieving follow focus shooting, panoramic shooting. The slider can be used on the ground or worked with a tripod, it can be directly connected with the camera or indirectly connected with cameras via ball head. Features: 1.Following Objectives: Install camera on the metal bar in the center of the rail and lens focus on the object. Then move camera to top left and adjust the screws on both ends of the bracket to keep the lens focusing the object, do the same on top right. After readjust these three steps slightly times then you finish the Following Objectives setting. 2 Scan Shooting: Install camera on the metal bar in the center of the rail and set the start angle according to the scan scope that you need. Adjust the screws on both ends of the bracket per you demand then you finish the setting. 3 Stretching lens: Set the shooting angle after installing camera on the metal bar, by moving the metal bar you can shoot a video from far to near or vice versa. Specifications: Product properties: Manual Camera Dolly Slider Size: 11inch Slide length: 10.4inch Slide rail weight:1.2pound Load-bearing: 11pounds Packing List: 1x Manual mini Camera slider 1x Box