We specialize in hard to find items
All Categories
Kyoritsu - KEW2046R 2046R True RMS Digital Clamp-Meter, 600A AC/DC, Conductors to 33mm, Voltage, Capacitance, Frequency, and Resistance Measurement
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
Kyoritsu - KEW2046R 2046R True RMS Digital Features
-
Digital clamp-meter measures AC and DC to 600A, AC and DC voltage to 600V, capacitance to 4,000 microfarads, frequency to 10kHz, and resistance to 60 megohms
-
True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
-
Clamp with 33mm (1.3 inches) jaw opening measures current without touching or interrupting the circuit
-
Peak hold function captures the highest reading of inrush current at the startup of motors and other inductive loads
-
Meets IEC safety standards 61010-1, 61010-031, and 61010-2-032, and is rated for CAT IV installations up to 600V
About Kyoritsu - KEW2046R 2046R True RMS Digital
The Kyoritsu 2046R digital clamp-meter is a true RMS sensing, auto-ranging multimeter for measuring current, voltage, capacitance, frequency, and resistance in electrical testing applications. It has a clamp that measures AC (alternating current) and DC (direct current) to 600A (amperes). The clamp has two jaws that can close around an electrical conductor up to 33mm (1.3 inches) in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC and DC voltage to 600V, capacitance to 4,000μF (microfarads), frequency to 10kHz (kilohertz), and resistance to 60MΩ (megohms). Frequency can also be measured with the clamp. The meter has a rotary switch to select the property to measure, and a 6,039-count LCD with a backlight for visibility in low light. The display shows the reading numerically and in a 60-segment bar graph. The meter's peak hold function captures the highest reading of the inrush current at the startup of motors and other inductive loads. Its relative function allows a measurement to be set as a reference value and displays subsequent measurements as a negative or positive deviation from that value. The minimum/maximum function tracks the lowest and highest readings for a property for as long as the function is engaged. To capture readings in tight spaces and aid documentation of readings, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. An NCV (noncontact voltage) detector in the jaws senses voltage without making contact with the circuit and triggers a red LED when voltage exceeds 100V. A continuity buzzer confirms that the circuit conducts electricity, and a diode check detects whether a circuit’s diodes are working properly. When paired with a K-type thermocouple probe (sold separately), the meter's temperature function can display temperature readings in degrees C and degrees F. The unit operates on two 1.5V AAA batteries, and turns off automatically after 15 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced. This true RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of the waveform. It is auto-ranging, so it automatically selects the appropriate operating range for the property being measured. Accuracy and resolution specifications vary according to the range being measured. The meter meets IEC (International Electrotechnical Commission) safety standards 61010-1, 61010-031, and 61010-2-032, and is rated for CAT (category) IV installations to 600V, which covers equipment at the origin of the installation, such as electricity meters and primary over-current protection equipment. It has EC (European Conformity) marking. The unit comes with a carrying case. SpecificationsMaximum AC (alternating current) input600AMaximum DC (direct current) input600AMaximum AC voltage input600VMaximum DC voltage input600VMaximum capacitance detected 4,000μFMaximum frequency detected10kHzMaximum resistance detected60MΩInstallation ratingCAT IV, 600VStandards metIEC safety standards 61010-1, 61010-031, and 61010-2-032;CE markingPower supply(2) 1.5V AAA batteriesWeight300g/10.6oz.Dimensions (H x W x D)243 x 77 x 36mm/9.57 x 3.03 x 1.42 inches H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Clamp-meters, also called clamp-on meters, have two jaws that fit around a conductor to measure electrical current without cutting through wires, or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp-meters diagnose problems in electrical equipment, wiring, and power supplies. All clamp-meters test for current. Some come with test leads and inputs for measuring voltage, capacitance, and resistance. They display informa
