ELEOPTION Mechanical Watch Timing Tester Timegrapher LCD Multifunction MTG-1000

Pay with

About ELEOPTION Mechanical Watch Timing Tester

Parameter: Beat Numbers (Frequency Numbers) 1.Automatic The following beat numbers are selected by automatic selection mode: 12000,14400,18000,19800,21600,25200,28800,36000,43200 (If the tested beat is not in automatically selection, the instrument will display the closest beat number, but the test result is not correct. At this time, use the manual mode to select the relative beat.) 2.Manual selection It can selected out the beat number that Automatic select can not identify and rare beat number. The following beat are selected by Manual selection mode: 3600,6000,7200,7380,7440,7800,9000,9100,10800,11880,12000,12342,12480,12600,13320,13440,13500,14000,14040,14160,14200,14280,14400,14520,14580,14760,14850,15000,15360,15600,16200,16320,16800,17196,17258,17280,17786,17897,18000,18049,18514,19332,19440,19800,20160,20222,20944,21000,21031,21306,21600,25200,28800,32400,36000,43200 Lift Angle The lift angle is 52° for many common movements, therefore the lift angle value of instrument for factory is set to 52°. This value is required to calculate the amplitude and must be selected according to the watch movement. The lift angle can be set to between 30°and 70° Period The measuring period selectable:2s,4s,8s,10s,20s,30s,60s Use to recalculate the average values of the test result. 　 Main Technical Parameters 1.daily rate : -999 s/d ~ +999 s/d, allowable tolerance: ±1 s/d 2.Amplitude : 100o ~ 360o, allowable tolerance : ±1o 3.beat error : 0 ~ 9.9 ms, allowable tolerance : 0.1 ms 4.power supply : single - phase AC 110 ~ 240V ±10%, power consumption : about 10 W Package Included: 1 x Set of timegrapher