CNCTOPBAOS 8NM Nema34 Closed Loop Stepper Motor 8N.m 86x86x118mm 6A,Hybrid 2-Phase 2HSS86 Servo Motor Driver Controller Kit 30-100V DC CNC Kit with 3m Cable for CNC Router Engraving Milling Machine

Pay with

CNCTOPBAOS 8NM Nema34 Closed Loop Stepper Motor Features

• ♞【Motor specifications】Holding Torque:8N.m; Current:6A; Peak current:8.0A; Phase:2; Size:86x86x118mm; Step Angle(degrees):1.8 degree; Motor Lead Wire: 4-wire; Encoder lines:1000

• ♞【2HSS86 Driver】2-Phase Hybrid Stepper Servo Driver; Frequency:0-200KHz; Insulation resistance:>=500MΩ; Voltage: AC 24-70V or DC 30-100V input;

• ♞【Advantages】Stepper motor closed loop system,never lose step; The stepper motor control has a new generation of 32-bit DSP. The vector control technology can ensure the accuracy of the motor; Improve motor output torque and working speed; Automatic current adjustment based on load; Pulses response frequency can reach 200KHZ; 16 kinds microsteps choice,highest 51200microsteps/rev.

• ♞【More Functions】It supports over-current protection, over-voltage protection, position outside the tolerance protection.The build-in place in position and alarm output signal can help the upper monitor to monitor and control,the function of position ultra difference alarm can ensure the machine work safely.

• ♞【Widely used】Closed loop stepper system can be applied to all kinds small automatic equipment and instrument. Such as engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, graph plotter, cnc machine, automatic assembly equipment and so on.This motor driver kit fits all types of machine load conditions (including pulley and low stiffness pulley) without adjusting the gain parameters.

About CNCTOPBAOS 8NM Nema34 Closed Loop Stepper Motor

Package include: 1 x 86HSE116 Closed-loop servo motor  1 x HSS86 Servo driver 1 x ​3M Extension cord Descriptions: Wiring: Red:     A+ Green:  A- Yellow: B+ Blue:    B- 2.2) Features 2.2.1  Stepper motor closed loop system, never lose step. 2.2.2  Improve motor output torque and working speed. 2.2.3  Automatic current adjustment based on load, lower temperature rising. 2.2.4  Suitable for all mechanical load conditions (include low rigidity belt pulley and wheel), no need to adjust gain parameter. 2.2.5  Motor work smoothly and low vibration, high dynamic performance at acceleration and deceleration. 2.2.6  No vibration from high speed to zero speed. 2.2.7  Drive nema 34 series closed loop stepper motor. 2.2.8  Pulses response frequency can reach 200KHZ. 2.2.9  16 kinds microsteps choice, highest 51200microsteps/rev. 2.2.10  Voltage range: AC24~70V or DC30V~100V. 2.2.11  Over-current, over-voltage and position ultra difference protection function.  Electrical Parameter Voltage rangeAC24~70V or DC30~100V Peak currentPeak 8.0A (current change according to load) Logic input current7~20mA Frequency0~200KHz Suitable motor86HSE156,86HSE118, 86HSE82 Encoder lines1000 Insulation resistance>=500MΩ