All Categories
Jump start 12V vehicle Instruction: 1. Connect the blue plug fully seated into the host, and make sure the Cable Indicator is off. 2. Connect Red Clamp to the positive (+) battery terminal, Black Clamp to the negative (-) battery terminal. 3. Operate following the instruction of the Cable. 4. Start the vehicle. 5. When the vehicle is started, remove the jumper cable from the vehicle battery. Leave the vehicle's engine running. Specifications: Dimension: 156*80*29mm / 6.1*3.1*1.2 inch Weight: 390g / 0.85lb Battery Capacity:10000mAh(29.6Wh) Output: Dual Quick Charge(5V/2.4A; 9V/2A; 12V/1.5A) Input: Quick Charge(5V/2.4A; 9V/2A; 12V/1.5A) Full Charging Time: About 3 hours by 15V 1A; 4 hours by 5V 2A Start Current: 200A Peak Current:450A Operating Temperature: -20℃~60℃ Warning: 1. Jump for 12V vehicles only, it would be hazard if for other jumping. 2. DO NOT use this unit if any cable clamp or cord is damaged. 3. DO NOT use in place of a vehicle battery. 4. DO NOT use as a battery charger. 5. Never remain the unit on car battery after cranking the car success. 6. Use the jumper cable provided with this unit only. 7. Make sure the BLUE plug of the jumper Cable is plugged fully into jumping socket; otherwise, the blue plug would be melted. 8. Make sure to check all the battery connections are CLEAN before Jump Starting! 9. Do NOT Jump Start more than 3 times in a row. 10. Do NOT expose product to extreme heat or fire.