X

Browning VTWS-239 Ball Bearing Take-Up Unit, Setscrew Lock, Non-Expansion, Regreasable, Contact and Flinger Seal, Cast Iron, Inch, 2-7/16" Bore, 1-1/16" Slot Width, 5-1/8" Frame Width

Product ID : 30102482


Galleon Product ID 30102482
Shipping Weight 0 lbs
I think this is wrong?
Model
Manufacturer
Shipping Dimension 0 x 0 x 0 inches
I think this is wrong?
-
Product is Out of Stock as of Nov, 15 2023
Want to monitor availability?
of brand new stock?
or
Need this item ASAP?
Check if this is available on Amazon
or available in other sites
Send us the link so we can buy for you

Pay with

About Browning VTWS-239 Ball Bearing Take-Up

This Browning VTWS 200 series ball bearing take-up unit with a set screw lock, cast iron housing, and contact and flinger seals is designed for use with take-up frames in applications that require adjusting shafts or belt tension, such as conveyor systems. The one-piece housing is made of cast iron for rigidity and vibration damping, has a semi-solid base to provide mounting stability, and slotted sides that fit into a take-up frame to allow movement within the frame. The standard-duty, deep-groove ball bearing insert in the housing is made of 52100 chromium steel supports average radial loads and combination radial and thrust loads. For increased shaft support and holding power, the bearing has an extended inner ring and a zone-hardened inner race. A rivet on the outer ring prevents rotation of the ring in the housing, reducing heat buildup and prolonging the bearing life. This self-aligning bearing has a spherical outer surface that compensates for misalignments, and honed races for quiet operation. The bearing locks onto the shaft with two set screws spaced 120 degrees apart for a three-point contact hold. This lock type minimizes ring distortion and vibration and is suitable for low- to moderate-speed applications where the shaft rotates in a single or reversing direction. Single lip contact seals on both sides of the bearing help retain lubricant applied at manufacture and prevent contamination. For added protection, flingers on the inner ring deflect contaminants away from the seals. A nylon retainer spaces the ball rollers for even load distribution and prevents contact to reduce friction, vibration, and noise. This bearing has a grease fitting on the outer surface for reapplying lubricant. Operating temperatures for this bearing range from -20 to +200 degrees F. This wide-slot take-up bearing unit is suitable for applications including conveyors, food processing equipment, and agricultural equipment, among others.Mounted bearing