EWO'S LMP-H202 LMP-H201 Replacement Projector Lamp Bulb for Sony VPL-HW30AES HW30ES HW50ES HW55ES VW95ES HW30 HW30ES SXRD HW40ES Projector

Pay with

About EWO'S LMP-H202 LMP-H201 Replacement Projector Lamp

Parameter: EWO’S new replacement projector bulb with housing. Perfect match is only applicable to your correct projector model. Voltage: 220V Power: 200W Lamp Life: 2000 hours Installation: 1. Turn off the projector and unplug the AC power cord. 2. Loosen the screw on the lamp cover with a Philips screwdriver, and then open the lamp cover. 3. Loosen the 3 screws on the lamp with the Phillips screwdriver. Hold up the handle, then pull the lamp straight out. 4. Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 3 screws. 5. Close the lamp cover, and then tighten the screws 6. Plug in the AC power cord. Warm Noted: Be sure to use an LMP-H202 Projector Lamp for replacement. If you use lamps other than the LMP-H202, the unit may malfunction. Be sure to turn off the unit and unplug the power cord before replacing the lamp Then check the ON/STANDBY indicator has already been turned off. The lamp remains hot after the unit is turned off with the (ON/STANDBY) button. If you touch the lamp, you may burn your fingers. When you replace the lamp Wait for at least 1 hour for the lamp to cool. Do not touch the surface of the lamp If you touch it, wipe off the fingerprints with a soft cloth