3 Color 2 Station Table Type Single Wheel with Dryer Screen Printing Press Screen Printer DIY Equipment

Pay with

About 3 Color 2 Station Table Type Single Wheel With

Operations 1.After well installed,connect the power supply 2.Turn on the switch and the it will work automatically 3.Put the probe of the thermometer on the dtying table,heat for some time(20 minutes in reference)and then check the actual temp.if the temp is too low or too high,just risen or lower the height of the drying box. Reference Data Based on our text,in the condition of 24degree room temperature and no air flowing around the dryer,when the flash dryer has been working for about 30 minutes,the max temp of 0.79''(2cm) below the drying box can reach about 190degree Adopts stainless steel heater Power:1600W Dryer size : 49*45*8cm（19*18*3inch） Parameter: Package Dimensions:78*48*18cm G.W.:14KG Main features and functions of this machine: The frame can rotate arbitrarily in 360 degree The platen can print four color Equipped with four handles on both sides of the chuck adjust the screen printing frame After trimming complet of the adjustment the handle is fixed on the front of the chuck The screen frame support arm is equipped with fourhandles on both sides adjust the screen printing. Adjustment the two screws before the screws fixed after trimming fix up two screws. The frame clamp can achieve 2cm height adjustment according to the substrates height .the platen can move 10cm front and back All the frame clamps can achieve the best up-down tension by adjusting the spring tension according to the frames weight There are metal positioning wheel,positioning groove and positioning steel sheet.To make sure the overprinting accurate the code number:006213