We specialize in hard to find items
All Categories
AC Compressor Clutch Coil Assembly Kit Replacement for Honda Accord 3.0L 2003 2004 2005 2006 2007
Share Tweet
of brand new stock?
or
Need this item ASAP?
Check if this is available on Amazon
or available in other sites
Send us the link so we can buy for you
AC Compressor Clutch Coil Assembly Kit Replacement Features
-
Compatibility: AC Compressor Clutch Assembly Kit fit for 2003-2006 Acura MDX 3.5L, 2004-2008 Acura TL 3.2L, 2007-2008 Acura TL 3.5L, 2003-2007 Honda Accord 3.0L, 2005-2007 Honda Odyssey 3.5L, 2005-2008 Honda Pilot 3.5L, 2006-2008 Honda Ridgeline 3.5L
-
What is A/C COMPRESSOR CLUTCH:The AC compressor is the core of the automotive air conditioning refrigeration system, which is driven by the engine through an air conditioning clutch. When the compressor is overloaded, the clutch will also protect the compressor under certain conditions
About AC Compressor Clutch Coil Assembly Kit Replacement
The complete kit includes: Pulley that has been pressed into the bearing Electromagnetic coil Clutch plate SHIMS Keep editing Center nut WIRE CLIP Replacement for: 2006-2011 Honda Civic 1.8L Replaced Part Number of Matched AC Compressor: 4918, 4918U1, 38810-RNA-A02, 38800-RNA-A011M2, 98555, 97555 4992, 38810RNAA02, 38810RRBA01, 3410, 4901, 80221SNAA01, 80221STKA41, 80221SVAA01, 80221SWAA02 How to replace with new AC compressor Clutch 1) Always wear goggles and start with the installation tool. 2) Remove the clutch rotor using a puller. 3) Remove the bearing from the clutch rotor. 4) Measure the gap between the friction surfaces of the compressor clutch. 5) Ohm check single-line AC compressor clutch coil, ground is supplied through the compressor main body. 6) Two high pressure cut-off switches. If the system pressure is too high, the single function switch will interrupt the compressor function. The dual function switch first engages the high speed cooling fan in an attempt to reduce the pressure by increasing the heat transfer at the condenser. However, if the system pressure continues to rise after the fan is turned on, the switch will interrupt compressor operation. 7) Hold the clutch hub with the appropriate tool while removing the bolt or nut. 8) Use a puller to remove the clutch plate and hub. 9) It is also recommended to search for relevant installation videos on the Internet.
