All Categories
The installation Slot of the spring collet into the position of the eccentric circle of the nut.Push the collet in the direction indicated by the arrow until a click indicates that the collet is in place.2. Install the spring chuck onto the cutter, and make sure the cutter is installed in place.3. Knock the nut against the tool handle and tighten it with a wrench.(torque wrench is recommended to tighten the nut) Remove Unscrew the nut from the handle, pull out the cutter, push in from the front of the spring collet and press down on the bottom of the eccentric circle at the same time, push the spring collet obliquely until the spring collet and the nut are separated.