Plugable Thunderbolt 3 to Dual DisplayPort Display Adapter Compatible with MacBook Pro Systems (201987), Project or Stream to up to 2X 4K 60Hz Monitors Or 1x 5K (Thunderbolt 3 Certified)

Pay with

About Plugable Thunderbolt 3 To Dual DisplayPort Display

Supports up to two additional independent 4K displays (or a single 5k display) with 60Hz refresh rates. Thunderbolt 3-attached displays tap directly into your system's graphics processor to enable high-performance output without utilizing additional system resources.Not all Thunderbolt 3 systems are compatible with dual display graphics adapters. Compatible SystemsFor both graphics adapter outputs to function, system manufacturer must have routed all DisplayPort lines to the Thunderbolt 3 port(s). This is an engineering decision made by your system manufacturer. Currently only Apple, Dell and HP Thunderbolt 3 systems meet this requirement but more compatible Thunderbolt 3 systems are expected in the future.Tested/validated with:Dell XPS 13 9350 & XPS 15 9560Apple MacBook Pro 2016 and iMac 2017Requires up-to-date system BIOS, Thunderbolt 3 drivers and firmware installed on host system.Non-compatible SystemsWill not function when attached to a non-Thunderbolt 3 USB-C portAs mentioned above, most current non-Apple, Dell or HP Thunderbolt 3 systems are not fully compatible due to a limited number of DisplayPort lines routed to the Thunderbolt 3 port.Usage with non-DisplayPort DisplaysConversion to HDMI/DVI /VGA can only be done with active adapters (not inexpensive DP++ passive adapters).In the Box1x Plugable TBT3-DP2X w/ built-in 10 inch (25 cm) Thunderbolt 3 USB-C cable and quick-install guide.