AnEssOil 110V 15.6L Galvanized Liner Blast Drying Oven Laboratory Silent Constant Temperature Oven Intelligent Digital Display Drying Electromechanical Oven (202-00T)

Pay with

About AnEssOil 110V 15.6L Galvanized Liner Blast Drying

Feature The 101-1 series drying boxes are designed with strong convection air ducts and side centrifugal wind wheel design to ensure continuous circulation of wind power. This series of drying ovens is designed with a reinforced keel and a reinforced sheet at all four corners. Even if the temperature reaches 250 degrees or above, the cabinet will not be deformed. The whole shell adopts electrostatic spraying technology, which can achieve ten years of no rust, environmental protection and practicality. Steps 1. Open the door, put the items that need to be dried on the partition inside the box, close the door, adjust the vent hole at the top of the instrument to the required state, and make appropriate according to the temperature of the dried item during the drying process. Adjustment. 2. Connect the power supply that requires the same equipment as the device, and ground the ground terminal of the power socket you are using. 3. Turn on the power switch and heating switch, the indicator light is on, the instrument starts to work, and the temperature control meter starts to display the temperature of the studio. 4. According to the temperature of the dried goods, you need to set the required temperature. 5. The instrument can turn on or off the fan cycle as needed. It must be noted that the device cannot be turned off during the heating process to avoid excessive aging of the heating components. 6. Turn off the power and heating switch of the equipment after the work is finished. It is recommended to wait for the equipment to cool before opening the door to deal with the problem. 7. It is recommended to use the device for self-tuning and temperature control for the first time to ensure accurate and safe use.