BN-80U Dual USB GPS GLONASS GNSS Receiver with USB Level 5.0V Supply Voltage 2M Length for Laptop PC Car Marine Navigation

Pay with

About BN-80U Dual USB GPS GLONASS GNSS Receiver With USB

Features: Dimension: 56mm*56mm*18mm Weight: 70g Connector: USB 2.0 Male interface Specification Chipset: M8030-KT Receiving Format: GPS, GLONASS, BEIDOU, GALILEO, SBAS, QZSS. Default GPS, GLONASS, SBAS, QZSS. Frequency: GPS L1, GLONASS L1, BEIDOU B1, GALILEO E1, SBAS L1, QZSS L1 Channels: 72 Searching Channel Sensitivity Tracking: -167dBm Reacquisition: -160dBm Cold start: -148dBm Hot start: -156dBm Accuracy Position Horizontal: 2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky) Velocity: 0.1m/sec 95% (SA off) Timing: 1us synchronized to GPS time Acquisition Time Cold Start: 26s Warm start: 25s Hot start: 1s Data output Support Rate: 4800bps to 921600bps, Auto-adapted baud rate Data Level: Default USB level Data Protocol: NMEA-0183 or UBX, Default NMEA-0183 NMEA Message: RMC, VTG, GGA, GSA, GSV, GLL\ Update Rate: 1Hz-10Hz, Default 1Hz FLASH: 4M FLASH, Store the configuration permanently Mechanical Specifications Cable Length: 2.0m Fixed: Magnetic bottom Operational Limits Altitude: 50,000m Max Velocity: 515m/s Max Acceleration: Less than 4g Power consumption VCC: DC Voltage 3.6V-5.5V,Typical: 5.0V Current: Capture 70mA/5.0V Environment Operating temp: -40 °C ~ +85°C Storage Temp: -40°C ~ +105°C Pin Description: 1: PIN VCC: DC 3.6V-5.5V supply input, Typical: 5.0V 2: PIN D-: USB D- 3: PIN D+: USB D+ 4: PIN GND: Ground Packaging List 1Piece BN-80U USB GPS Receiver