X

Buy Products not in the Philippines

Galleon.PH - Discover, Share, Buy!

Proxxon 37040 DH 40 MICRO Planer

Product ID : 5754109


Galleon Product ID 5754109
Shipping Weight 18.6 lbs
I think this is wrong?
Model 37040
Manufacturer Proxxon
Shipping Dimension 13.82 x 12.2 x 11.18 inches
I think this is wrong?
-
Product is Out of Stock as of Nov, 15 2019
Want to monitor availability?
of brand new stock?
or
Need this item ASAP?
Check if this is available on Amazon
or available in other sites
Send us the link so we can buy for you

Pay with

Features

  • Dust protected on/off switch
  • Restart protection in case of power interruption
  • 110 - 120V AC, 60Hz,150 watt equals 6000 rpm

Description

Perfect for fine planing work on soft and hard wood. An excellent machine for fine planing work with a particularly smooth finish for hardwood and softwood work pieces. Perfect size unit for all kinds of applications, where precision to a fraction of a millimeter is needed. The unit's load bearing components are all made of die-cast aluminum, with milled seats for bearings and spindles, being essential for vibration-free, smooth and clean planing, guaranteeing maximum stability. The triple spindled table is milled to close tolerances and can be conveniently adjusted to 0.1 mm (0.004") by a large zero adjustable hand wheel on top of the housing. The cutter shaft has two HSS reversible cutters for a particularly long service life. Replacement of the cutters is facilitated by means of a generously sized service flap. The planer has an automatic feed unit. The work piece therefore is only pushed by hand into the feed slot for a short distance. A knurled and spring-loaded roller then draws the work piece in, thus enabling even irregularly shaped pieces of wood to be planed. After passing the cutter shaft the piece of wood is pushed out at the rear by a rubber-coated roller to protect the surface of the work piece. The unit has a dust-protected on/off switch with restart protection in case of power supply interruption. Replacement Cutters Made from HSS, 82 mm long. Technical Data: 115 V, 60 Hz, 115 hp (150 W), 6,000 rpm. Feed speed: 4.8 m/min, Max. pass-through height: 40 mm (1 37/64"), Max. pass-through width: 80 mm (3 9/64"), Length of planing table: 232 mm (9 1/8"), Planing cutter length: 82 mm (3 7/32"), Chip decrease: up to 0.8 mm (1/32"), Overall size: 280 x 230 x 235 mm (11 x 9 x 9 1/8"), Weight: approx. 8.0 kg (17.6 lb), Double insulated Note: For better planning results, take a little off your timber at a time. All new tools come with a 2 year f